
FLUID FILM

Stopt
Rost
sofort
FLUID FILM Liquid A

Fluid Film | Automobile | Industry | Agriculture | Maritime shipping | Wind turbines
VISCOSITY: low (eg. like olive oil)
CREEPABILITY: + + + + +
DURATION: min. 2 years (in closed cavities)
PROCESSING: with conventional compressed air systems without heating the material or in the flood method
FLUID FILM Liquid A is a transparent, solvent-free and oily corrosion protection coating with a high lanolin content.
It corresponds to the United States Military Specification – MIL-C-16173
APPLICATIONS
FLUID FILM Liquid A was originally used for flooding ballast water tanks in need of repair on ships, floating docks, offshore units, etc., in which a compromise between effort and protection had to be found.
Thanks to the good experience in shipping, FLUID FILM Liquid A is also used for temporary corrosion protection during the storage and transport of goods. Its strong creeping properties and easy processing also predestine it as a corrosion inhibitor for cavities in motor vehicles or for refreshing old underbody coatings.
ADVANTAGES
In contrast to conventional products, FLUID FILM Liquid A is environmental friendlier and economical to use due to its solvent-free composition.
The basic substance lanolin is non-volatile like oil or kerosene and is not resinous. On the other hand, the effect of solvents usually wears off after 12-15 seconds, that of oil or kerosene ends after a few days, whereby these conventional agents then completely lose the protective effect.
Surface Preparation
In conventional processing using sprayers, brushes or rollers for corrosion protection measures, FLUID FILM Liquid A can be used on dry or damp, bare or rusty surfaces that need to be protected against salt water and any weather conditions.
EFFECT
- solvent-free and physiologically harmless during application and as a protective film
- requires minimal surface treatment
- penetrates rust, displaces water and forms an extremely resistant corrosion protection
- good adhesion to damp or dry surfaces
- no evaporation, resinification or drying out of the protective film
- is not washed off by rain or sea water, but can
- be easily removed if necessary
- can be applied by flooding or any other conventional processing method
- Fast operational readiness of the tank after application
PACKAGING
- 1 litre plastic bottle
- 1 litre cartridge
- 5 litre plastic canister
- 20 litre pail
- 208 litre drum
DATA SHEETS (PDF)
For a full screen view, click on the diagonal cross.
To download the PDF, click on the 3 dots on the left and then go to “Download”.

